Sonntag, 24. Juli 2016

Where to Share Your Free Knitting And Crochet Patterns

When I started to design knitting patterns, I wasn't interested in hit rates and traffic to my blog. Over the years I have wanted to increase my traffic. There are a lot of general posts around that give really good advice on how and where to share your posts - these deal with Search Engine Optimization (SEO), commenting on other peoples' blogs, shareable photos, best times to share your posts on social media etc.

I have followed some of this advice in the past and it has helped a lot to drive more readers to my blog (especially SEO is important - since it will make search engines find your content). However, as a knitting blogger, I would also have liked to get more specific links, i.e. a compilation sites that useful for knitting (and crochet) bloggers to promote their content.

Since I haven't found any such list yet, this post specifically lists sites, directories, social media groups etc. for knitting and crochet patterns. It may be useful both for designers that are trying to get more traffc to their blogs as well as crafters trying to find free resources.

So, which sites do you use? Do you have any other recommendations to share or find free patterns? Let me know in the comments.





Pattern Directories and Pattern Sharing Sites


  • allfreeknitting.com / allfreecrochet.com: Huge directory of knitting and crochet patterns where you can submit your patterns using a standard web form. You need to create an account to submit your projects - but they might link to your pattern in one of their newsletters which usually provides a spike in my webside traffic.
  • craftgawker.com: A curated photo gallery to showcase the works of craft bloggers. You have to create an account and use a web form to submit your work. They also review the submissions in order to make sure that the photos match their standards.
  • shareapattern.com: Links to a new free knitting, crochet and sewing pattern each day. You have to register to submit a pattern.
  • knittinghelp.com: A site with videos to help knitters learn new techniques that also lists free patterns by category. You can submit a pattern using this web form.
  • CraftGossip.com: According to their about page "CraftGossip covers news written by craft people telling you about all the good stuff". To submit your pattern for being linked to, you have to fill in a form
  • 365crochet.com - crochet patterns only - there is a web form to submit a free pattern to be listed
  • knittingpatternsgalore.com / crochetpatternsgalore.com 
  • craftroulette.com

Social Media for Knitters and Crocheters


Ravelry

Ravelry is THE site to share and find knitting and crochet patterns - both free and paid. You have to create an account to search their huge pattern directory, but it is well worth it. The search function is excellent. As a designer you can showcase your pattern there - and you also have the fun of seeing other people's projects from your patterns. Over the years Ravelry has provided more than 20% of the traffic to my blog.

Facebook Groups

On Facebook there are a lot of groups for knitters and crocheters - on some of them you can also share your free patterns. Just search for "knitting" or "crochet" and apply for membership.
Groups that are specifically made to post free patterns are  for example (links only work if your are logged in to Facebooks) Ravelry Free Pattern Alerts, Ravelry Free Pattern Alerts (Knit Only), Free Crochet and Knitting Patterns. Other great knitting and crochet groups are Knitting, Love Knitting and Crocheting, CROCHET ADDICT and (if you can read German) nadelspiel ... Whichever group you post your patterns to, make sure to read the group's rules and comply to them and don't spam!


Google+ Groups

On Google+ there are al so a lot of groups for knitters and crocheters - many of them also allow to post links to your free patterns (but as always, read the group rules and comply to them - and don't spam). Just search for knitting/crochet groups and ask to be admitted. Groups that I post my patterns to include: Knitting, Knitting Bloggers, Knit Along on Google+, Knitters Support Group and Some Crochet Too, The Crochet Lounge, Free Crochet Patterns, The Crochet Café and many more ...


Pinterest and Pinterest Group Boards

Pinterest calls itself as "the world’s catalogue of ideas". You can certainly find a lot of inspiration there - not only in the yarny arts but also in recipes, home decor, life hacks etc.
Pinterest is great to store good ideas (by pinning them to your boards), but also to promote your own projects and blog posts, You can do this by pinning to your own boards and using appropriated hash tags. You can encorage others to pin your posts by using Pinterest friendly photos and adding a Pin-It-Button using Pinterest's widget builder.

Group Boards: If you want to find a suitable group board, go to PinGroupie.com, browse the groups and ask to be added as a contributor as indicated (this process may be different for different boards).
If you have created a group board yourself, you can list it at a Group Board Directory.

Group Boards that I post to are: Let's Knit and Crochet, Knitting Knitting Knitting PIN for ALL, Fiber Arts Community Board {P2P}, Yarn Love Community Pinboard, my knit affair ¦ pin here, The WHOot Best Crochet and Knitting, etc. (And no, I'm not the owner of any of these boards so I cannot add you to the list of contributors - you have to ask the owner's permission (politely!) - and it's their decision to accept you or not.) Also, all of these boards have a set of rules to comply to.


Yarny and Crafty Link Parties

If you are featured at a link party, it might create a spike in your blog's hit rate - especially if it's a popular link party and the hosts share the features on their social media channels. Here's a list of link parties that specialise in "yarny" stuff:

More link parties (not yarn specific) that I regularly frequent can be found here.
Other peoples (crafty) link party lists are for example here and here. One general link party directory can be found here.


Forums etc.





So, these are my favorite places to promote my patterns. I hope this list was helpful to you and I would love to add more recommendations to my list.

Donnerstag, 14. Juli 2016

Rettangolini Scarf

Crochet yourself a fun summer accessory with this breezy scarf. It's constructed of rectangular modules that are connected as you go.

Rettangolini Scarf - free crochet pattern by Knitting and so on


This scarf is the crochet version of my (knitted) Little Rectangles Summer Scarf.






Abbreviations and Special Techniques:
  • DC = double crochet (US terminology) - as shown in this YouTube video by HappyBerry Crochet 
  • Chainless Double Crochet Foundation Stitch (CDCF): A way of starting with double crochet stitches without doing chain stitches first. It is shown in this YouTube video by Gleeful Things.  
  • Connected Chainless Double Crochet Foundation Stitch (cCDCF): Yarn over and insert your hook into the bottom of the last CDCF (see picture 1 below), yarn over and pull the yarn through once (see picture 2), then insert the hook of the edge of the next rectangle of the layer below (see picture 3), yarn over and pull through two loops (the one picked up from the next rectangle and the next on your hook (see picture 4), then finish like a normal DC.
How to do a Connected Chainless Double Crochet Foundation Stitch (click on image to enlarge)



Materials
Since gauge doesn't matter here, you can basically use any yarn weight to crochet this scarf. I used the following

  • about 120 grams of fingering weight yarn
  • a 3.5 mm crochet hook
  • a tapestry needle to weave in ends


Rettangolini Scarf - free crochet pattern by Knitting and so on

Construction

This scarf is constructed in layers of DC rectangles (12 DCs wide and 4 rows high). Each layer consists of 5 rectangles one on top of the last one but with an offset of 8 stitches. The layers are at right angles to the layer below - at bit like entrelac, but with spaces inbetween.
The first rectangle of one layer connects with the fifth or last rectangle of the layer below, the second with the fourth rectangle, the third with the third of the row below, the fourth with the second and the fifth with the first from the row below. This construction is shown in the picture below.


If you like your patterns charted, here's a chart of the whole pattern. If you rather like written instructions see below.
Rettangolini Scarf - full chart
Chart (click on image to enlarge)

Instructions

First Layer

First rectangle
Row 1: ch 4, do a double crochet into the first chain, do 10 CDFCs, turn
Row 2: ch3, do 11 DCs (one into each double crochet in the row below), turn
Row 3 = Row 2
Row 4 = Row 2

Second to fifth rectangle
Row 1: starting with the 2nd DC in the row below, do 8 slip stitches, chain 3, do 3 DCs into the remaining DCs of the row below, do 8 CDFCs, turn
Row 2: ch3, do 11 DC (one into each double crochet in the row below), turn
Row 3 = Row 2
Row 4 = Row 2


Rettangolini Scarf - free crochet pattern by Knitting and so on


Second Layer (and all subsequent layers)

First rectangle
Row 0: ch 7 (see illustration A1)
Row 1: ch 3, do 7 DCs (one into each ch of row 0). do 4 DCs into the side of rectangle 5 of the layer below, turn  (see illustration A2)
Row 2: ch3, do 11 DCs (one into each double crochet in the row below), turn
Row 3 = Row 2
Row 4 = Row 2 (see illustration A3)
First rectangle of layers 2 and following (click on image to enlarge)

Second to fifth rectangle
Row 1: starting with the 2nd DC in the row below, do 8 slip stitches, chain 3, do 3 DCs into the remaining DCs of the row below (see illustration B1), do 3 CDFCs, 1cCDFC (connecting it to the corner of the next rectangle in the layer below, see illustration B2), do 4 DCs into the side of this rectangle (see illustration B3), turn
Row 2: ch3, do 11 DCs (one into each double crochet in the row below),
Row 3 = Row 2
Row 4 = Row 2
Second to fifth rectangle of layers 2 and following (click on image to enlarge)

Repeat this layer until the scarf is as long as you want it to be.
Weave in ends and block gently.


This post was featured at Fiber Tuesday Link Party #77 at OuiCrochet. Thank you!

Dienstag, 5. Juli 2016

Summertime Garter Stitch Top

Usually, I'm the queen of unfinished sweaters. But for once I finished this summer tunic and I'm quite proud about it. I made a similar one last year but I honestly didn't like the front part (too many short rows) - so I did it again with a straight front part.

Knitted nearly all in garter stitch - except for the very short sleeves, this sweater is great to bring out the color combinations of variegated yarn. It is knitted flat - again except for the sleeves that are knitted in the round.


Dansk / Danish: A danish translation (by Marianne Holmen) can be found here.



Creative Commons License
This work by Knitting and so on is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.




This is NOT a pattern with stitch counts for various sizes but a tutorial on how to knit a top like this. I will however give my numbers (lengths and widths, stitch and row counts) that I used - just to provide an example (these parts of this blogpost are written in purple).

In this post I assume that your already familiar with the general concept of a top-down raglan sweater. If you've never done this, here's a nice blog post by Knitting Pure and Simple that explains the idea or try to read this Raglan tutorial by Kirsten Tendyke - or knit a top-down pattern such as Buttercup by Heidi Kirrmaier or Gemini by Jane Richmond. (Here's a list of the free, knitted top-down sweaters on Ravelry; you nust be logged in to make this link work.)


Materials
  • yarn - I used about 900 meters of Sports weight yarn - more specifically, I used about 5,5 skeins of  Lana Grossa Elastico Print - Colorway 509 (here's the link to the yarn's Ravelry page)
  • a needle that fits the yarn, I used 4.5mm circular needles
  • a second knitting needle for the grafting at the end
  • 4 stitch markers for the top-down raglan part
  • scrap yarn to put the arm stitches on
  • two safety pins or other removable stitch markers
  • a tapestry needle ot weave in ends

Techniques

Measuring and Swatching
Knit a swatch with the yarn and the needle that you want to use for this sweater and measure your gauge. Usually, I don't swatch - for smaller projects - even if it doesn't fit, I generally can see this early enough, i.e. after about the same time, it'd take to knit the swatch. However, everytime I skipped swatching for a sweater or something similar, I ended up just knitting a bigger swatch, like half a sweater or two thirds of a cardigan :)

Now, either measure your body or take the following measurements on a t-shirt or top that fits you well:

A = width of your neck
B = circumference of your arms
C = from shoulder to under your arms
D = half of the circumference under your arms
E = from your shoulder to your bust
F = half of your bust circumference
G = from your should to your waist
H = half your waist circumference
I = the total length of your sweater
J = half of the circumference of your hips (where you want your sweater to end



Cast on your sweater and knit the yoke

With your measurements and your swatch you can calculate your CO accordingly:
My gauge was 34 garter stitch rows (i.e. 17 ridges) to 10 cm and about 20 sts to 10 cm.
I wanted a neckwidth of about 17 cm (34 sts) and 3cm for each arm (6 sts).

Therefore my CO was 50 sts with stitch markers as follows: 2 sts (front), marker, 6 sts (arm), marker, 34 sts (back), marker, 6 sts (arm), marker, 2 sts (front),

Then start knitting the yoke according to your calculations with a raglan calculator. To be honest, I have never used any of these calculators, I prefer to do increases around the stitch markers - and stop increasing when I have reached the desired width and then going on without increasing until the yoke piece is long enough. But if you want to distribute your increases evenly over the length of your yoke or you have a bigger size, you should calculate your increases.

R1: sl1 purlwise, k all
R2: sl1 purlwise, knit to one before marker, kfb, slip marker, kfb, k to one before marker, kfb, slip marker, kfb,  k to one before marker, kfb, slip marker, kfb,  k to one before marker, kfb, slip marker, kfb, k to end

Repeat rows 1 and 2 until either
a) the arm part reaches your arm circumference (=B)
b) the back part is wide enough (=D)

In case of a) do only increases on the front and back piece, i.e
R2a sl1 purlwise, k to 1 before marker, kfb, slip marker, k to marker, slip marker, kfb, k to one before marker, kfb, slip marker, k to marker, slip marker, kfb, k to end

In case of b) do only increases on the arm parts, i.e.
R2a sl1 purlwise, k to 1 marker, slip marker, kfb, k to 1 before marker, kfb, slip marker, k to marker, slip marker, kfbm k to one before marker, kfb, slip marker, k to end

When both a) and b) are true, repeat only R1 until the piece is long enough to separate the arm stitches (C).

To reach my intended yoke length (19 cm), I knitted 62 rows, increasing every 2nd row up until row 60 where I only did increases in the arm parts and knitting without any increases in row 62. 
I put the arm stitches on scrap yarn in the 63rd row with the following stitch count (31 (front), 64 (arm), 92 (back), 64 (arm), 31 (front). I cast on 2 sts under each arm (with backwards loop CO)

Now your yoke is finished: Knit one row and put the arm stitches on scrap yarn, i.e.
k to marker, put all stitches from here to the next marker on scrap yarn, remove both stitch markers, CO 2 with backwards loop cast-on (and put a stitch marker between the two newly cast on stitches), knit to next marker, put all stitches from here to the next marker on scrap yarn, remove both stitch markers, CO 2 with backwards loop cast-on (put a stitch marker between the newly cast on stitches), k to end.

The stitch marker you just put will be called underarm markers.

Knitting the underarm part

Now all rows are knitted in garter stitch with the first stitch slipped purlwise. All shaping is done around the underarm markers.

Calculate how many stitches you have to increase (if at all) to reach your bust width - and then calculate how to distribute them among the rows to knit (length = E-C) and then do the increase rows along the underarm marker.
R increase = sl1 purlwise, k to one before marker, kfb, slip marker, kfb, k to one before marker, kfb, slip marker, kfb, k to end

Since my bust width doesn't differ much from the underarm width, I didn't increase at all. Therefore I knitted 12 cm straight down (about 42 rows with my gauge). 

Now calculate how many stitches you have to decrease to reach your waist width - and then calculated how to distribute them among the rows to knit (length = G-E). Do the decrease rows along the underarm marker.
decrease = sl1 purlwise, k to two sts before marker, ssk, slip marker, k2tog, k to two stitches before marker, ssk, slip marker, k2tog, k to end

I wanted to reach my waist 43 cm from the shoulder, therefore I knitted 10 more cm straight down and then distributed my decreases over the next 4 cm (or about 15 rows)  (from 45 cm width to 42 cm, i.e. 6 stitches with my gauge, ie. 3 decrease rows with 2 sts decrease per row and side). 

Calculate how many stitches you have to increase to reach your hip width - and then calculate how to distribute them among the rows to knit (length = I-G) and then do the increase rows along the underarm marker.
increase = sl1 purlwise, k to one before marker, kfb, slip marker, kfb, k to one before marker, kfb, slip marker, kfb, k to end

I knitted about 5 cm straight (about 17 rows) and then I increased 8 times every 5th row. That way I widened the piece by 16 stitches per side (i.e. 8 cm with my gauge). I then knitted straight down until I had reached my intended length (about 60 cm).


Knitting the sideways front piece

Once your piece is long enough cast off and cut yarn. Try it on and put a stitch marker to the point where you want your neckline to end, Count the number of rows from the bottom to this point and count the same number on the other front edge.

Now pick up and knit this number of stitches of the selvedge of the left hand side of your front - from the bottom hem of your top up to your stitch marker. To get a nice edge I only picked up the back loops of the selvedge stitches.



Knit straight rows until you have reached the intended width - this should be roughly as wide as your neck width (A). Photo 1 (below) shows how your piece looks after a few knitted rows; it also shows the yarn ends I used as removable stitch markers to mark where I wanted my neckline to end.

To get to the height I wanted, I picked up 74 stitches from the edge. I wanted about 15 cm (a bit less than the neck width used before) - therefore I knitted 52 rows.

Make sure to end on after an even row (counting the pick up and knit row as the first).

With your second needle pick up the stitches on the other selvedge (i.e. right hand side of your piece) from the stitch marker to the bottom (if you use circulars, you can start from the bottom hem as well). Here I also picked up only the back loops (i.e. the ones closest to the WS) to get a consistent look.
Photo 2 (above) shows how the piece looks with the two needles, just before grafting.

Graft both sides together in stockinette stitch.


Sleeves

Put the arm stitches of one arm from your scrap yarn to your needle(s) and pick up 4 underarm stitches (i.e. 2 above the backwards loop CO stitches you made when you transfered the arm stitches to the scrap yarn plus 1 at each side in the gap between these stitches and the live ones). Place a stitch marker (end of round marker) in the middle of these underarm stitches.

Row 1: p2tog, purl to last two stitches, p2tog
Row 2: k2tog, k to last two stitches, k2tog
Row 3: p all
Row 4: k all
Repeat rows 3 and 4 until your sleeves are as long as you'd want them to be and bind off.
I knitted a total of 18 rounds before doing my BO round.

Do the same with the second sleeve.


Weave in ends an block lightly.

Freitag, 17. Juni 2016

Modular Crochet

After I'd finished a huge knitted scarf for a friend, I didn't have an interesting UFO lying around. I played around a little with leftover yarn, but nothing seemed to interest me. Eventually, I started a crochet version of the Little Rectangles Scarf I published about a year ago. Even though, at first I didn't like it much, it seems to grow on me and it's actually fun to crochet :)



Freitag, 10. Juni 2016

Undecided Slippers

A pair of slippers is always useful to warm your feet. This design is mostly in garter stitch, but with an unusual construction that shows up nicely when you use selfstriping yarn.

Undecided Slippers - Free Knitting Pattern by Knitting and so on

Materials
  • 3mm circular needles (even though everything is knitted back and forth)
  • about 45 grams of fingering weight yarn
  • tapestry needle for grafting and to weave in ends
  • 3 stitch markers - at least one of them should be removable (e.g. a safety pin)

Techniques


Size, Gauge and What You Need to Measure

The pattern is written in a way that you can adapt it to the width and length of your feet. Before you start, measure around the widest point of your feet.

I had a gauge of 5 cm to 12 sts, and 5cm to 13 ridges in garter stitch (i.e. 26 rows in garter stitch) and 2 cm to 8 rows of stockinette stitch. With this gauge and with a CO of 2x18 sts, the tip bit is 12 cm long. You can adjust the length of this part by casting on more or less stitches.

Undecided Slippers - Free Knitting Pattern by Knitting and so on


Instructions

Part 1:

Magic CO 2x18 sts (i.e. 18 sts on each needles).

Now turn your needles around in a way that you're looking at the garter stitch bumps.
All rows of part 1 will be knitted in a U-shape, i.e. you knit the stitches on the first needle turn the piece upside down (this point will be called turning-point ("TP") and knit the stitches on the other needle. Then you turn your knitting to the WS and knit back.

Setup Row: k18 to TP, turn ktbl 18
Rows 1 to 9: sl1, k to 1 st before TP, kfb, turn, kfb, k to end (after a few rows your piece should look similar to photo no. 1)
Row 10: sl1, k to end
Row 11 = Row 1
Row 12 = Row 10
Row 13 = Row 1
Row 14, 15 = Row 10
Row 16 = Row 1
Row 17 and following: continue knitting rows without increases (i.e. Row 10) until the piece is wide enough to fit halfway around your feet (i.e. its half the width of the widest point of your feet) - and remember how many rows without increases you have knitted. Your piece should now look like photo no. 2. For me to reach a width of 11 cm, I had to knit 9 rows without decreases. Place a removable stitch marker in the first stitch of the next row. (This is where you will start to pick up the stitches for part 2.)

Knit the same number of rows without increases again.

Basically now rows 1 to 16 are knitted backwards with decreases instead of increases. i.e.

Row 35: sl , k to 2 sts before TP, ssk, turn, k2tog, k to end
Row 36, 37: sl1, k to end
Row 38 = Row 35
Row 39 = Row 36
Rows 40 to 50 = Row 35
Row 51: sl1, k18 (i.e. to the middle of the row) 
Break yarn leaving a tail of about 40 cm and start grafting in garter stitch. (See photo no. 3)
Graft both sides together in garter stitch. 
Part 2:

Starting at the point where you put the removable stitch marker, pick up and knit stitches around the rim of the tip (one stitch per garter stitch ridge) - see photo no. 4. 
Part 2 is knitted back and forth (not in rounds), so one row is knitted from the inside of the slipper and the next row from the outside.

Count the stitches and devide the number by 4 (this number will be called X). In row 1, you will place two markers, one X stitches away from the beginning of the row and another X stitches away from the end of the row.

Row 1 (inside) : sl1, k X-1 sts, place marker, p to last X sts, place marker, k to end
Row 2 (outside): sl1, k to end
Row 3 (inside): sl1 k to marker, p to marker, k to end
Row 4 (outside) = Row 2
Row 5 (inside) = Row 3
Row 6 (outside) = Row 2
Row 7 (inside) = Row 3
Row 8 (outside): sl1, kfb, k to last 2 sts, kfb, k1
Row 9 (inside) = Row 3
Repeat rows 2 to 9 once more
Then repeat rows 2 and 3 until the length of the slippers are  4 cm short of the total length of your feet.

Now the heel decreases are started:
Row 1 (outside): sl1, k to marker, ssk, k to 2 sts before marker, k2tog, k to end
Row 2 (inside): sl1, k to marker, p to marker, k to end
Repeat these 2 rows 3 more times.

Now, between the two markers there should be as many stitches left, as there were garter stitch ridges without increases or decreases in part 1.

From now on only one of the upper parts (in garter stitch) are worked, the stitches between the markers will be decreased row-by-row and the second garter stitch bit will not be worked until the kitchener stitch in the end.

Row 1: sl1, k to marker, ssk, turn, sl1, k to end
Repeat row 1 until there are only two stitches between the two markers

Then knit the following (last) row: sl1, k to 1 sts before marker, do a double central decrease

Now there should be the same number of stitches on both needles.
Graft in garter stitch.

Weave in ends.
Make two. 



Undecided Slippers - Free Knitting Pattern by Knitting and so on


This blogpost was featured at the Really Crafty Link Party #34, at the Linky Ladies Community Link Party No. 99 and at the New Tuesday Pin-spiration Link Party {36}. Thank you!

Linky Ladies Tuesday Pin-spiration Link Party

Mittwoch, 18. Mai 2016

Papagena Scarf

This new playful scarf is great to display the lovely colors of yarn with a long color gradient. It's made up of stacked stitches for the fringes and modularly knitted diamonds.



As to the name: When I posted a picture of this scarf progress, somebody felt reminded of the Queen of the Night from Mozart's opera "The Magic Flute". I really liked this association - however, I felt that the scarf looks a bit too ragged to belong to the very elegant and cold figure of the Queen of the Night, but better fitted to the persona of Papagena.


Creative Commons License
This work by Knitting and so on is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.




Other languages

русский / Russian: Fellow Raveller lutik made a video explaining this pattern (in Russian): It can be found here on YouTube. Спасибо!

Dansk / Danish: A danish version was written by MarianneHo (Ravelry name). It can be found here on strikkeglad.dk or here as a PDF. Mange tak!


Materials
  • 3.5 mm knitting needles - I used long circulars
  • about 170 grams of fingering weight yarn - I used Noro Taiyo Sock
  • a lot of stitch markers
  • 1 removable stitch markers to mark RS (called "RS-marker")
  • tapestry needle to weave in ends



Special Stitches and Techniques
  • SB = slip back the number of sts to the left hand needle
  • dec9-1 = k3, sl1, [k2tog, psso, SB1] 3 times
  • This is called stacked decrease. There is a YouTube-video from So, I make stuff's YouTube channel that shows how to do stacked decreases.
  • Short Rows (t+p): There are several techniques for short rows – and it’s a matter of taste which one you prefer. I’ve recently learned a technique called German short rows: when you turn, bring yarn to the front and pull it back so that a sort of double-stitch is created, then knit back as usual - when you have to knit the double-stitch, be careful to knit it as one stitch (see also https://www.youtube.com/watch?v=P6n561SMZXQ); this method has the advantage the no picking up of stitches is necessary. In the pattern, this stitch will be called t+p (turn and pull).
  • Knitted Cast-On: http://youtu.be/IzVy8fRfOw0
  • Stretchy Bind-Off: http://youtu.be/cGHItYwr1us




General Construction

The schematic below shows the general construction of the scarf. It starts with a module at the tip and then grows by layers. Each row starts with an increasing module (called type Inc-B) and ends with another (slightly different) increasing module (called type Inc-A). Inbetween these increasing modules, there are normal basic modules (called type Basic) - starting from the second layer after knitting the tip. Since the layers are knitted in different directions, the RS and WS will switch when a layer changes.
General Construction
Here's how a basic module is knitted:
Row 1 (RS): k25, t+p
Row 2 (WS): k24, t+p
Row 3 (RS): k22, t+p
Row 4 (WS): k20, t+p
Row 5 (RS): k18, t+p
Row 6 (WS): k16, t+p
Row 7 (RS): k14, t+p
Row 8 (WS): k12, t+p
Row 9 (RS): k10, t+p
Row 10 (WS): k8, t+p
Row 11 (RS): k6, t+p
Row 12 (WS): k5, t+p
Row 13 (RS): k6, t+p
Row 14 (WS): k8, t+p
Row 15 (RS): k10, t+p
Row 16 (WS): k12, t+p
Row 17 (RS): k14, t+p
Row 18 (WS): k16, t+p
Row 19 (RS): k18, t+p
Row 20 (WS): k20, t+p
Row 21 (RS): k22, t+p
Row 22 (WS): k24, t+p
Row 23 (RS): k24 ... then go on knitting the next module without turning

Depending on where the module is placed, it may be changed a bit as explained in the instructions.

How to knit a basic module

Instructions

Knitting the tip of the scarf

CO88 (use any CO method you like)
Row A: k all
Row B: k1, * dec9-1, k2 repeat from * 7 times (or until there are only 10 sts left), dec9-1, k1
Row C: k12 place marker k12
Then knit R2 to R22 of the basic module and place the removable marker on the RS when it is possible to attach it.


Layer 1

Inc-B Type Module
Place marker at the end of the row and CO44 sts (with knitted CO)
Row A: k43, ktbl, slip marker, ktbl, k11, t+p
Row B: k11, slip marker,  k1, * dec9-1, k2 repeat from * 3 times (or until there are only 10 sts left), dec9-1, k1
Row C: sl1, k24 t+p
Then knit R2 to R21 of the basic module
Row 22: sl1, k24, t+p
Row 23: sl1, k23


Move the RS-marker to the other side of your knitting

Inc-A Type Module
Knit 12 sts, place marker at the end of the row and CO44 sts (with knitted CO)
Row A: k43, ktbl, slip marker, ktbl, k10, t+p
Row B: k11, slip marker,  k1, * dec9-1, k2 repeat from * 3 times (or until there are only 10 sts left), dec9-1, k1
Then knit R1 to R22 of the basic module (don't turn)

The photos on the right show how the piece looks while knitting Rows A and B of an Inc-A type module.


Layer 2 and all subsequent layers

Knit an Inc-B type module
Knit Basic Module(s) until there are only 12 sts left
Move the stitch markers to the other side of the piece
Knit an Inc-A type module


The last layer

Knit an Inc-B type module up to and including row 22.
Row 23: BO24

Knit rows 1 to 22 of a normal module
Row 23: BO24

Knit an Inc-A type module up to and including row 22
Row 23: BO24

Weave in ends and block it.




Oombawka Design Featured on Knitting Love Link Party with Jessie At Home and Underground Crafter

Samstag, 7. Mai 2016

T-Shirt Upcycling

Currently I love watching DIY videos on YouTube - especially sewing tutorials and even more especially tutorials where people use thrifted materials to create something new and stylish. Currently, my favorite channels are:
They all have wonderful ways of creating their own patterns from clothes they already own and a great way of explaining the mechanics of sewing.

That's why I wanted to do something similar - however, with a knitting spin. I decided to use a t-shirt that had holes in the front part (just below the neckline) and "cover" these holes with a knitted collar. Here's how the piece looks in progess ... if it works out the way I want, I guess I will write a tutorial.